frequently asked questions
-
a typical home inspection price in Georgia ranges from $350 to $650, and will depend on a variety of factors (home size, home age, job complexity, and additional services).
New J-M does not rush inspections. our value is built into the time and attention that we give to every home, and we are not afraid to spend as much time inspecting as is necessary until there is nothing left to evaluate.
-
Georgia real estate transactions will almost always be the responsibility of the buyer. there are several benefits to this:
• you can make an informed decision on whether you’d rather proceed, renegotiate, or walk;
• the reality is that the inspector works for the buyer, not the seller or the agent
regardless of these facts, already-competitive and growing markets tend to favor pre-listing inspections. sellers have begun hiring inspectors before listing to:
• find existing or potential red flags early
• make proactive repairs
• more strategically price the home
• lower your risk for surprises during due diligence -
absolutely! we’re proud of what we do, and want you to know the quality of work to expect from us.
a home inspection report should:
• be thorough, yet easy to understand• have photos of actual findings
• clearly state observed defects, why they're relevant, and how to fix them
with us, you will receive a report that’s:
• delivered on the same day• easily viewable on mobile and desktop
• full of high-resolution photos and descriptions, along with severity ratings and next steps
• written to be understood by buyers, agents, and repair professionals.
our reports are informative, but not overwhelming. -
we inspect every visible, accessible part of the home, which includes:
• roof (shingles, flashing, vents, chimney)• attic (structure, ventilation, insulation)
• exterior (siding, grading, drainage, decks, porches)
• foundation & structure (cracks, moisture entry, settlement)
• plumbing (visible pipes, fixtures, water heaters, leaks)
• electrical (panel, outlets, GFCIs, visible wiring)
• HVAC (heating and cooling equipment operation, filters, airflow)
• interior (windows, doors, stairs, floors, ceilings, outlets, etc.)
• basement/crawl space (moisture, pests, foundation visibility)
• garage (door operation, GFCI, structure, safety)
• appliances (basic testing for fixed units like ovens and dishwashers)
we do not inspect:
• inside walls• underground pipes or wells (unless using sewer scope equipment)
• pools or spas (unless separately qualified)
• anything blocked or inaccessible at the time of the inspection
therefore, please ensure that every part of the home is accessible on the day of the inspection. locked attics, blocked crawlspaces, or cluttered panels reduce what we can inspect, and in turn can hide defects. -
this is where we distinguish ourselves from other firms—a typical home inspection in Greater Atlanta might take:
•1.5 to 2.5 hours for homes up to 2,000 square feet
•2.5 to 4 hours for homes up to 3,500 square feet
•4+ hours for larger homes, older properties, or ones featuring extensive crawlspaces and/or additions
at J-M, our inspections take up to 2 hours longer than the industry standard. this is because we inspect everything about the home we can until there is nothing else to assess. we don’t simply check items off a list, we:
• open every panel that’s accessible• inspect each attic and crawlspace we can safely enter
• test the HVAC, GFCI, visible gas shutoffs, and water pressure
• document thoroughly with photo evidence
• answer any and all questions you have on-site
we don’t perform ’fast’ inspections. we perform thorough inspections—and that’s what will save you money and stress in the long run. -
certainly. the HVAC system is one of the most important (and expensive) parts of any home. it’s a core part of each inspection we perform.
we inspect:
• thermostat function• heating and cooling operation (weather permitting)
• airflow at registers
• dirty filters or clogged returns
• signs of leakage or microbial growth near air handlers or ductwork
• condition of visible ductwork
• age and serial numbers of units
we, however, do not:
• disassemble internal components• perform refrigerant or CO2 pressure tests (that’s for licensed HVAC techs)
but in many cases we can still spot issues early such as:• burnt-out capacitors
• improperly installed drain lines
• mold around coils or condensate pans
• units long past their service life (somewhat common in older homes in Marietta and Sandy Springs)
-
yes, doing so is a standard part of our inspections.
we check to see if:
• smoke detectors are present in required locations: ○ inside each bedroom
○ outside sleeping areas
○ on every level of the home• detectors respond to manual testing
• CO detectors are present in homes with: ○ gas appliances
○ attached garages
○ fireplaces•detectors are interconnected or battery-only
we take note of:
• expired detectors (10+ years old)
• missing or painted-over alarms
• improper locations, such as too close to an HVAC return or cooking appliances
aside from the safety concerns, this matters for code compliance when applying to certain loans like the FHA, VA, or HUD rehab loans. -
yes, identifying and reporting on the type of plumbing and condition that it’s in is among our primary responsibilities.
in Georgia, the types we commonly find are:• copper (reliable but prone to pinhole leaks as it ages)
• PEX (flexible, modern material—but can be weaker at fittings or from UV exposure)
• CPVD (dated material, often found brittle and discolored)
• galvanized steel (typically found in homes built before the 1960s—rusts and restricts water flow)
• polybutylene (PB) (often considered a defective product and flagged for replacement)
if your home has polybutylene piping, we’ll state so clearly in the report. it’s prone to failing without warning, and often results in insurance difficulties and denied coverage.
we also check:• the type of water heater and its age
• TPR valve and drain line
• visible leaks, corrosion, or signs of past water damage
• if water flow is functioning at each accessible faucet and fixture
-
if it’s safe and accessible, yes. even if not, we will still inspect every visible surface using high-zoom photography, binoculars, ladders, and/or drone technology.
we inspect for:• shingles that are damaged, missing, curling, or blistering
• nail pops or other exposed fasteners
• moss or other organic growth
• flashing details around chimneys, valleys, vent, and skylights
• sagging or deflection of roof planes
• evidence of leaks visible from the attic
we also report on:• the roof’s wear and estimated age
• “shingle patching” or other improper repairs
• ventilation adequacy (soffits, ridge vents, power fans)
flat roofs and multi-story homes may limit our ability to physically walk the surface, but we’ll still provide visual evidence and recommendations. -
yes, we enter any attic that’s safe and walkable to report on:
• the type, depth, and coverage of insulation
• ventilation (soffit, ridge, gable vents, powered fans)
• the structure and sheathing of the roof
• any moisture staining or mold
• pest intrusion, such as by rat, bats, or squirrels
• disconnected or otherwise unsafe ductwork
insufficient insulation or poor airflow can contribute to:• moisture problems
• mold
• ice dams (these are rare in Georgia, but possible in the mountains of North Georgia)
• high HVAC bills
homes in Atlanta and Marietta built before 1990 often have insufficient attic insulation, and we’ll flag it if it’s below current R-value standards. -
yes, but with some clarification.
during a standard inspection, we check for:
• visible mold-like growth in attics, crawlspaces, basements, and behind appliances• musty odors (a red flag, especially in HVAC closets or unventilated bathrooms)
• improper ventilation that contributes to microbial growth
however, a full mold inspection or air quality test requires optional sampling using spore traps or surface swabs sent to a certified lab. we offer that for an additional fee.
air quality testing is available
if needed, we provide air samples for $110 per sample, and we can collect them onsite during your moisture inspection or general home inspection. lab results typically return within 48 to 72 hours. -
yes, these are critical to our inspection
crawlspaces are a major source of hidden issues in Georgia, especially around Atlanta and Marietta, such as:• foundation movement or settlement
• termite tunnels or wood rot
• moisture and microbial growth
• improper vapor barriers
• plumbing leaks
• unsupported HVAC or ductwork
we physically enter crawlspaces that is accessible and safe. we do not enter crawlspaces which are blocked or exhibit serious hazards such as flooding or exposed nails. we document such obstructions with photos in our report.
in basements, we inspect:
• efflorescence (white mineral deposits from moisture seepage)
• sump pumps and drainage
• structural cracks
• water staining or musty odors -
yes, we offer radon testing as an optional service—it is strongly recommended in many parts of Georgia.
it matter because:
•radon is a colorless, odorless radioactive gas that seeps from the soil
• long-term exposure can cause lung cancer
• the EPA recommends testing in all homes during real estate transactions
• Metro Atlanta is located in Zone 1 and Zone 2 areas, meaning moderate to high risk
we offer 48-hour continuous radon testing using digital monitors placed onsite. if levels exceed 4.0 pCi/L, we’ll recommend mitigation steps. -
yes, we inspect site grading and drainage flow around the foundation of every home
this matters because:
• improper grading allows water to collect near the foundation
• standing water leads to settlement, cracks, and basement leaks
• poor drainage is a leading cause of crawlspace humidity and mold
• inadequate downspout extensions or clogged gutters worsen the issue
we’ll check:• slope away from the foundation
• gutter and downspout setup
• French drains, swales, and sump systems
• landscaping that traps water near the structure -
yes, we inspect each and every visible and accessible component of the home’s structure, including:
• foundation walls (block, poured, slab)• support beams and posts
• framing in the attic or crawlspace
• joists, rafters, trusses
• stair framing, deck support, load-bearing walls
doing so lets us check for:
• settlement or shifting
• bowed or cracked foundation walls
• inadequate structural support (especially in DIY additions)
• water damage or rot compromising strength
• termite or carpenter ant damage
our inspections are non-destructive, meaning we don’t do things like tearing up flooring or removing drywall, but we do report on everything we can visibly evaluate. -
absolutely, the electrical system is of top priority in terms of safety
we inspect:
• the main electrical panel (breaker sizing, labeling, wiring condition)
• subpanels, if present
• double-tapped breakers
• bonding and grounding
• open splices or exposed conductors
• GFCI and AFCI protection in required areas (kitchens, bathrooms, garages, exterior)
• accessible outlets (especially near water sources)
• light fixtures and switches
• smoke/carbon monoxide detector power connections
note that many homes in the Atlanta area still have older panels (Zinsco, Federal Pacific, etc.) that we will always call out due to fire hazard concerns. -
yes, although we are not licensed exterminators, we always report on any apparent signs of termite activity, such as:
• mud tubes in crawlspaces or on foundations
• live or dead termites in damp wood
• powdery frass or chewed wood from carpenter ants
Georgia resides in a zone of high termite activity, and homes with insufficient drainage, siding in contact with mulch, or wood in contact with soil, are particularly vulnerable.
if we find evidence of termites, we will recommend:
• a licensed termite inspection, which can sometimes be required for loan approval
• treatment and monitoring plans -
there is a strong likelihood of lead paint being present in homes built before 1978, while homes built before 1990 could contain asbestos in their:
• popcorn ceilings
• floor tiles
• pipe insulation
• old HVAC duct wrap
we do not test for lead or asbestos on-site, but we do document:
• suspect materials based on age and visual clues
• areas of concern (especially if crumbling, damaged, or friable)
for definitive answers, we recommend lab sampling or specialized environmental testing. -
yes, water heaters are among the items most commonly flagged in our reports.
we inspect:
• age (based on serial number decoding)
• temperature setting
• expansion tank presence/support
• TPR valve and discharge pipe
• tank condition (rust, corrosion, leaks)
• gas line and venting (for gas models)
older units, typically 10 or more years old, are often past their life expectancy and may fail suddenly. we also document:
• undersized or unsupported expansion tanks
• improper drain pan installations
• units located in unsafe areas (like finished basements without drainage) -
yes, this is one of the top reasons clients choose New J-M Inspectors over other firms.
we’re committed to:
• clear, plain-English reports
• same-day report delivery with photos and summaries
• walkthroughs after the inspection to explain findings in person or over the phone
• being available for follow-up questions, even weeks later
we know that buying a home in Atlanta is stressful. we don’t just drop a PDF in your inbox—we make sure you understand what matters, what doesn’t, and what your options are.